Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

392 Fabric OS Message Reference
53-1000600-02
SEC-1121
66
Recommended
Action
Verify that the security event was planned. If the security event was planned, there is no action
required. If the security event was not planned, take appropriate action as defined by your
enterprise security policy.
Severity INFO
SEC-1121
Message <timestamp>, [SEC-1121], <sequence-number>,, ERROR, <system-name>, Time is out of
range when
<text>.
Probable Cause Indicates that the time on the switch is not synchronized with the primary fabric configurations
server (FCS), the data packet is corrupted, or a replay attack is launched on the switch.
Recommended
Action
Verify that the security event was planned. If the security event was planned, verify that all switches
in the fabric are in time synchronization with the primary FCS and that no external entity is trying to
access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1122
Message <timestamp>, [SEC-1122], <sequence-number>,, INFO, <system-name>, Error code:
<Domain ID>, <Error message>.
Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric
configurations server (FCS).
Recommended
Action
Run the secFabricShow command to verify that all switches in fabric are in the ready state. When
all switches are in the ready state, retry the operation.
Severity INFO
SEC-1123
Message <timestamp>, [SEC-1123], <sequence-number>,, INFO, <system-name>, Security
database downloaded by Primary FCS.
Probable Cause Indicates that the security database was successfully downloaded from the primary fabric
configurations server (FCS).
Recommended
Action
No action is required.
Severity INFO