Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 363

53-1000600-02

Chapter

SCN System Messages

SCN-1001

Message <timestamp>, [SCN-1001], <sequence-number>, FFDC, CRITICAL, <system-name>, SCN

queue overflow for process

Probable Cause Indicates that an attempt to write a state change notification (SCN) message to a specific queue

has failed because the SCN queue for the specified daemon name is full. This might be caused by

the daemon hanging or if the system is busy.

The valid values for daemon name can be:

• fabricd

• asd

• evmd

• fcpd

• webd

• msd

• nsd

• psd

• snmpd

• zoned

• fspfd

• tsd

Recommended

Action

If this message is caused by the system being busy, the condition is temporary.

If this message is caused by a hung daemon, the software watchdog will cause the daemon to

dump the core and reboot the switch.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

Severity CRITICAL