Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

252 Fabric OS Message Reference
53-1000600-02
FW-1374
30
FW-1374
Message <timestamp>, [FW-1374], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of incompatible security database violations has risen above the high
boundary. This violation indicates the number of secure switches with different version stamps
have been detected. When a switch is in secure mode, it connects only to another switch that is in
secure mode and has a compatible security database. A compatible security database means that
the version stamp and fabric configuration server (FCS) policy matches exactly.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity WARNING
FW-1375
Message <timestamp>, [FW-1375], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of incompatible security database violations has changed from a value
outside of the acceptable range to a value within the acceptable range. This violation indicates the
number of secure switches with different version stamps have been detected. When a switch is in
secure mode, it connects only to another switch that is in secure mode and has a compatible
security database. A compatible security database means that the version stamp and fabric
configuration server (FCS) policy matches exactly.
Recommended
Action
No action is required.
Severity INFO
FW-1376
Message <timestamp>, [FW-1376], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of illegal commands has changed. This counter tracks how many times
commands allowed only on the primary fabric configuration server (FCS) switch have been
executed on a non-primary FCS switch. There are many commands that can be executed only on
the primary FCS switch as well as one security command that can be executed only on a backup
FCS switch. The counter increments every time someone issues one of these commands on a
switch where it is not allowed.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity INFO