Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

206 Fabric OS Message Reference
53-1000600-02
FW-1135
30
FW-1135
Message <timestamp>, [FW-1135], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur
when a port or device initializes with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1136
Message <timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of fabric logins has changed from a value outside of the acceptable
range to a value within the acceptable range. Fabric logins occur when a port or device initializes
with the fabric. The event is called a fabric login or FLOGI.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1137
Message <timestamp>, [FW-1137], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP
state changes occur when the SFP is inserted or removed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1138
Message <timestamp>, [FW-1138], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.