Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

188 Fabric OS Message Reference

53-1000600-02

FSSM-1004

Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running

firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.

In a non-bladed system, this message is logged when the firmware upgrade/downgrade was

invoked. The new firmware version is not compatible with current running version. This cause a

disruptive firmware upgrade/downgrade.

Recommended

Action

For a dual CP system, run the firmwareDownload command to load compatible firmware on the

standby CP. For details on this command, refer to the Fabric OS Command Reference.

Severity INFO