Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 471
53-1002448-01
ISNS-1009
58
Recommended
Action
No action is required. You may change the configuration and retry the peering with the external
iSNS server.
Severity INFO
ISNS-1009
Message <timestamp>, [ISNS-1009], <sequence-number>,, INFO, <system-name>, Peering with
external iSNS server <iSNS server IP address> not started because no virtual
targets found.
Probable Cause Indicates that no virtual targets were found, so peering was not started.
Recommended
Action
No action is required. Peering will resume automatically when virtual targets are detected.
Severity INFO
ISNS-1010
Message <timestamp>, [ISNS-1010], <sequence-number>,, WARNING, <system-name>, Slot/port
<Slot>/ge<Port> is out of range.
Probable Cause Indicates the slot or port is out of range.
Recommended
Action
Retry with a valid slot or port. Refer to the appropriate hardware reference manual for valid slot and
port ranges.
Severity WARNING
ISNS-1011
Message <timestamp>, [ISNS-1011], <sequence-number>,, INFO, <system-name>, iSNS Client
Service is <iSNS client State (enabled/disabled)>.
Probable Cause Indicates the current state of the internet storage name services (iSNS) client is either enabled or
disabled.
Recommended
Action
No action is required. Use the fosConfig command to display, enable, or disable the iSNS client
service.
Severity INFO