Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

270 Fabric OS Message Reference
53-1002448-01
FCR-1068
37
The limit includes both active and configured information that is part of the zoning database in the
edge fabric. Non-LSAN zones are not counted in the limit.
Recommended
Action
Limit the logical storage area network (LSAN) zoning related zone configuration in the edge fabric
connected to this port.
Severity WARNING
FCR-1068
Message <timestamp>, [FCR-1068], <sequence-number>,, INFO, <system-name>, The FC Routing
service is disabled.
Probable Cause Indicates that the FC Routing service is disabled. This is caused by fosConfig –-disable fcr,
configDefault, or a configDownload with the fcrState set to 2 (disabled). Note that the FC Routing
service is disabled by the factory.
Recommended
Action
No action is required.
Severity INFO
FCR-1069
Message <timestamp>, [FCR-1069], <sequence-number>,, INFO, <system-name>, The FC Routing
service is enabled.
Probable Cause Indicates that the FC Routing service is enabled. This is caused by either fosConfig –-enable fcr, or
a configDownload with the fcrState set to 1 (enabled). Note that the FC Routing service is disabled
by the factory.
Recommended
Action
No action is required.
Severity INFO
FCR-1070
Message <timestamp>, [FCR-1070], <sequence-number>,, INFO, <system-name>, The FC Routing
configuration is set to default.
Probable Cause Indicates that the FC Routing configuration is set to default by user. This removes all prior FC
Routing configurations.
Recommended
Action
No action is required.
Severity INFO