Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 263
53-1002448-01
FCR-1037
37
Recommended
Action
No action is required.
Severity INFO
FCR-1037
Message <timestamp>, [FCR-1037], <sequence-number>,, INFO, <system-name>, LSAN zone
disabled in the backbone fabric.
Probable Cause Indicates that a logical storage area network (LSAN) zone is disabled in the backbone fabric.
Recommended
Action
No action is required.
Severity INFO
FCR-1038
Message <timestamp>, [FCR-1038], <sequence-number>,, WARNING, <system-name>, Total zone
entries exceeded local fabric limits by <overflow> entries, in zone: <zone name>,
zone limit: <LSAN zone limit>.
Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the
local switch&apos zone database limitations.
Recommended
Action
Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN)
zones created is within the range of the local database limitations.
Severity WARNING
FCR-1039
Message <timestamp>, [FCR-1039], <sequence-number>,, INFO, <system-name>, Local LSAN zone
<zone name> device entries for backbone LSAN exhausted.
Probable Cause Indicates that the number of devices in the specified logical storage area network (LSAN) defined in
the backbone fabric is greater than allowed by the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries from this LSAN zone until the number of devices is within the range
of the local LSAN zone database limitations.
Severity INFO