Brocade Fabric OS Administrator's Guide - Supporting Fabric OS v7.0.1 (53-1002446-01, March 2012)

Fabric OS Administrator’s Guide 157
53-1002446-01
IP Filter policy
7
Protocol
TCP and UDP protocols are valid protocol selections. Fabric OS v6.2.0 and later do not support
configuration to filter other protocols. Implicitly, ICMP type 0 and type 8 packets are always allowed
to support ICMP echo request and reply on commands like ping and traceroute.
Action
For the action, only “permit” and “deny” are valid.
Traffic type and destination IP
The traffic type and destination IP elements allow an IP policy rule to specify filter enforcement for
IP forwarding. The INPUT traffic type is the default and restricts rules to manage traffic on IP
management interfaces,
The FORWARD traffic type allows management of bidirectional traffic between the external
management interface and the inband management interface. In this case, the destination IP
element should also be specified.
Implicit filter rules
For every IP Filter policy, the two rules listed in Table 35 are always assumed to be appended
implicitly to the end of the policy. This ensures that TCP and UDP traffic to dynamic port ranges is
allowed, so that management IP traffic initiated from a switch, such as syslog, radius and ftp, is not
affected.
shell 514
uucp 540
biff 512
who 513
syslog 514
route 520
timed 525
kerberos4 750
rpcd 897
securerpcd 898
TABLE 35 Implicit IP Filter rules
Source address Destination port Protocol Action
Any 1024-65535 TCP Permit
Any 1024-65535 UDP Permit
TABLE 34 Supported services (Continued)
Service name Port number