HP 3PAR T-Class Installation and Deinstallation Guide

Figure 38 Removing a Bezel from the Storage System
Removing the Rear Door
HP 3PAR cabinets feature a locking rear door. HP recommends locking the rear door during
operation. At the time of delivery, the rear door is unlocked. The key is taped to the inside of the
rear door.
The rear door is also removable to improve access to the rear of the system during installation and
maintenance.
To remove the rear door:
1. Open the door by unlatching the three latches located at the top, center, and bottom of the
door.
To open the latches, lift the lever and turn counterclockwise one quarter turn.
2. Locate the two lift-off hinges near the top and bottom of the door (“Lift-Off Hinges on the Door”
(page 50)).
Removing the Rear Door 49