HP 3PAR T-Class Installation and Deinstallation Guide

12. Type yes to use the modem for file transfer and press ENTER.
Will inbound and/or outbound files transfers be allowed via the modem(yes or no)?
[yes]
[enter]
13. For technical support and services through remote location, press ENTER or type yes and
press ENTER, then continue to step 14.
To prohibit remote control of the service processor, type no and press ENTER, then skip to
step 15.
SP Network Parameters
Enter Control-C at any time to abort this process
Will this SP be allowed to be remotely controlled (yes or no)? [yes]
(Replying 'yes' will allow Remote Operations sessions from a Connection
Server)
[enter]
14. Type m to use modem for Remote Operations and press ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Which media will be used for Remote Operations ( ethernet or modem )?
Enter 'e' or 'm' [modem]:
[enter]
15. Type the phone number, including area code, for the service processor and press ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the SP’s local phone number, including area code, using only
the following characters: 0-9 ( ) - , Ex: [phone] 011 813 55 12123:
<splocalnumber>
NOTE: Enter any outside prefix separately in step 16.
16. Type the prefix required when dialing out from the operating site if applicable and press
ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Please enter the required prefixes when dialing out.
- Just hit enter for no prefix
- Number to get an outside line (ex. 8 or 9)
- Sequence to disable call waiting (ex. #70)
- When more then one sequence is required you may
Setting up the Service Processor 135