HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

controliscsiport
DESCRIPTION
The controliscsiport command is used to set properties of an iSCSI port.
SYNTAX
The syntax for the controliscsiport command can be one of the following examples:
• controliscsiport addr <IP_addess> <netmask> [-f] <node:slot:port>
• controliscsiport gw <gw_address> [-f] <node:slot:port>
• controliscsiport mtu <mtusz_bytes> [-f] <node:slot:port>
• controliscsiport dhcp on|off [-f] <node:slot:port>
• controliscsiport isns <isns_port> [-f] <node:slot:port>
• controliscsiport isnsport <isns_port> [-f] <node:slot:port>
• controliscsiport delete [-f] <node:slot:port>
• controliscsiport ping [<count>] <ipaddr> <node:slot:port>
AUTHORITY
• Super, Edit
• Any role granted the port_control right.
NOTE: You need access to all domains in order to run this command.
SUBCOMMANDS
addr
Sets the IP address and netmask of the iSCSI port.
gw
Sets the gateway address of the iSCSI port.
mtu
Sets the maximum transmission unit (MTU) size for the iSCSI port.
dhcp
Sets whether or not (on or off) the iSCSI target should use the DHCP to obtain its IP addresses.
isns
Sets the iSNS server IP address.
isnsport
Sets the TCP port number for the iSNS server. By default, the default iSNS port number is used.
delete
Deletes the iSCSI port configuration.
ping
Pings the specified IP address a specified number of times from the iSCSI port.
OPTION
-f
Do not ask for confirmation. The default is to ask for confirmation.
controliscsiport 81