HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)
removevlun
DESCRIPTION
The removevlun command removes a Virtual Volume’s (VVs) SCSI Logical Unit Number (LUN)
export definition from the system.
SYNTAX
The syntax for the removevlun command can be one of the following:
• removevlun [options] <VV|VVSet> <LUN> <n:s:p>
• removevlun [options] <VV|VVset> <LUN> <host|hostset>
• removevlun [options] <VV|VVset> <LUN> <host|hostset> <n:s:p>
• removevlun [options] <VV|VVset> <LUN> <n:s:p> <host|hostset>
AUTHORITY
• Super, Edit
• Any role granted the vlun_remove right.
OPTIONS
–novcn
Specifies that a VLUN Change Notification (VCN) not be issued after removal of the VLUN.
• For direct connect or loop configurations, a VCN consists of a Fibre Channel Loop Inititalization
Primitive (LIP).
• For fabric configurations, a VCN consists of a Registered State Change Notification (RSCN)
that is sent to the fabric controller.
–pat
Specifies that the <VV_name>, <LUN>,< N:S:P>, and <host_name> specifiers are treated as
glob-style patterns and that all VLUNs matching the specified pattern are removed. By default,
confirmation is required to proceed with the command unless the –f option is specified.
–dr
Specifies that the operation is a dry run and no VLUNs are removed.
–f
Specifies that the command is forced. If this option is not used, the command requires confirmation
before proceeding with its operation.
SPECIFIERS
<VV_name | VV_set>
Specifies the volume or volume set name, using up to 31 characters in length. The volume set name
must start with set:.
<LUN>
Specifies the LUN ID to remove.
<N:S:P>
Specifies that exports to the specified port are removed. If this specifier is not used, the host_name
specifier must be used.
node
Specifies the system port where node is a number from 0 through 7.
256 Remove Commands