HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

removesnmpuser
DESCRIPTION
The removesnmpuser command allows a user to remove an SNMPv3 user.
WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security
of the storage system.
SYNTAX
removesnmpuser [options] <username>
AUTHORITY
• Super, Service, Edit, Browse
• Any role granted the snmpuser_remove right.
OPTIONS
–f
Forces the operation so that the command does not require confirmation before proceeding.
SPECIFIERS
None.
EXAMPLES
The following example displays the removal of the an SNMP user:
cli% removesnmpuser -f joe
EXIT STATUS
The following codes are returned indicating success or failure:
• 0 indicates that the password was removed and the command was successful.
• 1 indicates that the command failed.
• 2 indicates that a password does not exist.
NOTES
After a user has been removed, an SNMPv3 manager can no longer use that username to send
requests to the SNMP agent. An SNMP user will also be removed if the removeuser command
has been issued on that user.
Verify the removal of SNMP users by issuing the showsnmpuser command.
removesnmpuser 247