HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

Specifies the logical disk name, using up to 31 characters.
<RAID_type>
Specifies the RAID type: 0 for RAID-0, 1 for RAID -1, 5 for RAID-5, or 6 for RAID-6.
<row_size>
Specifies the number of sets in a row.
<PD:ch>
Lists PDs and chunklet pairs.
RESTRICTIONS
None.
EXAMPLES
None.
NOTES
• Verify the creation of a logical disk by issuing the showld command. See “showld” (page 394)
for more information.
• To create a RAID-1 volume the mirror depth (-mdflag) must be specified. For RAID-5 or
RAID-6 volume the parityset (-psflag) must be specified. The owner and backup_owner
option should be a number between 0 and 7 and should be the node ID of a valid node in
the system. The mirror depth can take any value between 2 and 4, inclusive.
126 Create Commands