3PAR InForm® OS 2.3.1 Concepts Guide (320-200112 Rev B, February 2010)

14.8

The 3PAR SNMP Agent

3PAR InForm OS Concepts Guide InForm OS Version 2.3.1

14.4.2.3.1 alertNotify Traps

An alertNotify trap contains details about an event that may affect system operations and

performance. All alerts generated by the system as well as all alert status change events are

translated into alertNotify traps.

The following example shows an alertNotify trap translated from an alert:

For this and for all alerts, use the message code provided (e.g., 1703938) to refer to the InForm

OS Messages and Operator’s Guide for instructions regarding required operator actions

pertaining to the alert.

messageCode

Code that identifies the specific type of alert or alert

state change. For example, the message code for the

alert state change is 1245186. For alerts, use the

message code in referring to the InForm OS Messages

and Operator’s Guide for instructions on prescribed

operator actions.

Read-only

state

Current alert state, which is an integer between 0

and 5. See the 3PAR MIB for definitions for each

integer. Alert states enable users to maintain detailed

tracking of alerts throughout their life cycle.

Read-only

Table 14-2. Contents of the alertNotify trap (continued)

Object Descriptor Description Access

sysUpTime.0:0 hours, 28 minutes, 1 seconds.

snmpTrapOID.0:.iso.org.dod.internet.private.enterprises.threepar.inserv.alertNotif

component.1:comp_hw_node

details.1:Node 7 is offline

nodeID.1:0

severity.1:major(2)

timeOccurred.1:Wed Dec 15 16:58:20 PST 2004

id.1:647

messageCode.1:1703938

state.1:new(1)