3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

24.3
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
startld
DESCRIPTION
The startld command starts data services on a Logical Disk (LD) that has not yet been
started.
SYNTAX
startld [option] <LD_name>
AUTHORITY
Super, Service
OPTIONS
–ovrd
Specifies that the LD is forced to start, even if some underlying data is missing.
SPECIFIERS
<LD_name>
Specifies the LD name, using up to 31 characters.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example starts data services on LD ld5:
NOTES
None.
NOTE: You need access to all domains in order to run this command.
cli% startld ld5