3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.18
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
setclienv
DESCRIPTION
The setclienv command sets the CLI environment parameters.
SYNTAX
setclienv <parameter> <value>
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
None.
SPECIFIERS
The specifiers include the parameters and values to which the parameters should be set. Valid
parameters and their values are as follows:
<parameter> <value>
currentdomain
Enter one of the following:
■ The name of the domain that you wish to set as the working
domain for the current CLI session.
■ -unset to set no current domain.
listdom
Enter one of the following:
■ 0 - (Default) Do not include the domain column in the
output.
■ 1 - Include domain column where relevant.
csvtable
Enter one of the following:
■ 0 - (Default) Normal table printing format.
■ 1 - Comma Separated Values (CSV) format.
nohdtot
Enter one of the following:
■ 0 - (Default) Show header and total lines.
■ 1 - Does not show the header and total lines.