3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.5
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
setauthparam
DESCRIPTION
The setauthparam command is used to set the authentication and authorization
parameters.
SYNTAX
The syntax of the setauthparam command can be one of the following:
setauthparam [-f] <param> <value>
setauthparam [-f] <map-param> <map-value>...
setauthparam [-f] -clear <param>...
setauthparam [-f] -clearall
AUTHORITY
Super
OPTIONS
-f
Does not ask for a confirmation before performing the operation.
-clearall
Clears all the authentication parameters.
-clear
Clears only the specified authentication parameters.
SPECIFIERS
Specifiers for the setauthparam command can be issued as the following:
■ <param> <value> - See Table 21-1 on page 21.6.
■ <map_param> <map_value> - See Table 21-3 on page 21.10
■ <param> - See Table 21-1 on page 21.6.