3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

17.3
InForm OS Version 2.3.1 Command Line Interface Reference
-ovrd
Permits the moves to happen to a destination even when there will be a loss of quality
because of the move. This option is only necessary when the target of the move is not
specified and the
-perm flag is used.
SPECIFIERS
<fd:fp>[<–td:tp>]...
Specifies that the chunklet located at the specified PD (<fd>) and the chunklet’s position
on that disk (
<fp>) be moved to either the specified destination disk (<td>) and chunklet
position (
<tp>), or a location determined by the system if a destination (<-td:tp>) is not
specified. This specifier must be used at least once on the command line. Repeated use of
this specifier allows multiple chunklets to be moved.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example moves the chunklet in position 0 on disk 24, to position 50 on disk 64
and chunklet in position 0 on disk 25, to position 1 on disk 27:
The columns in the previous example are identified as follows:
■ Status. The overall status of the move.
◆ normal. Indicates the chunklet has successfully moved with no loss of quality.
◆ degraded. Indicates the chunklet has successfully moved with loss of quality.
◆ failed. Indicates the chunklet was not moved.
■ Detailed_State. Provides additional details of the move with General Information, Error
Information, or Degraded Information.
cli% movech 24:0-64:50 25:0-27:1
Are you sure you want to move the chunklets?
select q=quit y=yes n=no: y
Move -State- --Detailed_State---
24:0-64:50 normal normal
25:0-27:1 degraded disks_reused_in_row