3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

1.5
Organization
InForm OS Version 2.3.1 Command Line Interface Reference
■ Chapter 15, Hist Commands, includes the commands used to monitor existing service group
resources.
■ Chapter 16, Locate Commands, provides the commands used to identify physical system
resources.
■ Chapter 17, Move Commands, lists the commands used to relocate logical entities to
various resources in the service group.
■ Chapter 18, Promote Commands, describes the commands used to copy snapshots to base
volumes.
■ Chapter 19, Remove Commands, describes the commands used to remove logical resources
(such as logical disks, hosts, and virtual volumes) from within the system or current service
group.
■ Chapter 20, Service Commands, provides the commands used when replacing drive
magazines and FCAL cards in the storage server.
■ Chapter 21, Set Commands, provides the commands used to set specific system parameters.
■ Chapter 22, Show Commands, presents commands used to display information and status
for storage server hardware components.
■ Chapter 23, Shutdown Commands, covers the commands used to shut down entire clusters
and nodes.
■ Chapter 24, Start Commands, provides the commands used to start 3PAR Remote Copy and
the CIM service.
■ Chapter 25, Stat Commands, lists the commands used to display operational statistics for
storage server hardware.
■ Chapter 26, Stop Commands, provides the commands used to stop 3PAR Remote Copy and
the CIM service.
■ Chapter 27, Sync Command, covers the command used to synchronize Remote Copy volume
groups.
■ Chapter 28, Tune Commands, provides the commands used to detect and rebalance
physical disks with high service times.
■ Chapter 29, Update Commands, presents the commands used to update snapshot virtual
volumes.