3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

21.53
InForm OS Version 2.2.4 Command Line Interface Reference
–current
When issuing the setrcopygroup command with the reverse subcommand, only the
current direction of the groups is reversed.
SPECIFIERS
<policy>
Specifies the policy to assign to the group. This specifier can only be used with the pol
subcommand. Valid policies are:
fail_wrt_on_err
Specifies that if Remote Copy is started for the volume group and a write to the
secondary system fails, then an I/O error is returned to the host.
no_fail_wrt_on_err
Specifies that if Remote Copy is started for the volume group and a write to the
secondary system fails, then the Remote Copy operation is stopped and an I/O error
is not returned to the host (default).
auto_recover
Specifies that if the Remote Copy is stopped as a result of the Remote Copy links
going down, the group is restarted automatically after the links come back up.
no_auto_recover
Specifies that if the Remote Copy is stopped as a result of the Remote Copy links
going down, the group must be restarted manually after the links come back up
(default).
over_per_alert
If a synchronization of a periodic Remote Copy group takes longer to complete than
its synchronization period then an alert will be generated. This is the default
behavior.
no_over_per_alert
If a synchronization of a periodic Remote Copy group takes longer to complete than
its synchronization period then an alert will not be generated.