HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

Specifies an existing VV name.
RESTRICTIONS
• This command requires an HP 3PAR Dynamic Optimization license. Contact your local HP
3PAR representative for information.
• This command requires sufficient available physical space with the same owner or backup
node as the space it is being copied from.
EXAMPLES
The following example shows how to use the tunetpvv command to change the RAID type of a
TPVV (testvol) from cpg1, which is originally cpg1, which is of RAID 1.
Task 1 started.
The following example shows how to use the tunetpvv command to increase the availability
level of a TPVV (testvol). Note that there is mag availability because testvol was originally
on cpg1, which is created with option (–ha mag). To increase cage availability, create a CPG
with cage availability and tune testvol to the associated CPG.
cli% createcpg cpg3
cli% tunetpvv –cpg cpg3 testvol
Are you sure you want to tune VV ‘testvol’?
select y=yes n=no: y
Task2 started.
The following example shows how to tune multiple VVs together. Testvol.0, testvol.1 and
testvol.2 are the three VVs to be tuned:
cli% tunetpvv –cnt 3 testvol
Are you sure you want to tune VV ‘testvol’?
select y=yes n=no: y
Task 3 started.
NOTES
When canceling a tunetpvv command task, the canceltask command may return before a
cancellation is complete. Thus, resources reserved for the task may not be immediately available.
This will prevents actions like attempting another tune on the same VV. Scripts should use the
waittask command in order to ensure orderly completion of the tunetpvv command cancellation
prior to taking other actions.
tunetpvv 655