HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

growavv
DESCRIPTION
This command was deprecated in the 2.2.4 release and will be changed or removed in a future
release. Please use the growvv command in the future. If virtual volumes were created with
deprecated commands then only deprecated commands can be used to modify virtual volumes.
The growavv command enlarges a Virtual Volume (VV) with automatic mapping to the Logical
Disks (LDs).
SYNTAX
growavv [options] <VV_name> <user_LD_ID> <LD_size> <sa_LD_ID>
<admin_size> <sd_LD_ID> <snap_size>
AUTHORITY
• Super, Edit
• Any role that is granted the vv_grow right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
–verbose on|off
Specifies that verbose output is either enabled (on) or disabled (off). If not specified, verbose
output is disabled.
–dr
Specifies that the command is a dry run and that no logical disks or virtual volumes are actually
created.
-f
Suppresses the requested confirmation before growing a virtual volume size from under 2 T to over
2 T.
SPECIFIERS
<VV_name>
Specifies the virtual volume name, using up to 31 characters.
<user_LD_ID>
Specifies the LDs to be used as user space. The LDs are identified by one or more integers (item).
Integers can be provided as a single number (1), a comma separated list of numbers (1,2,3), or
a range of numbers separated with a dash (1–4).
<LD_size>
Specifies the size of your area in megabytes.
<sa_LD_ID>
Specifies the LDs to be used as snapshot administrator space. The LDs are identified by one or
more integers (item). Integers can be provided as a single number (1), a comma separated list
of numbers (1,2,3), or a range of numbers separated with a dash (1–4).
<admin_size>
Specifies the size of the administrator space in megabytes.
<sd_LD_ID>
176 Grow Commands