HP 3PAR Command Line Interface Administrator's Manual: HP 3PAR OS 3.1.2 (QR482-96525, September 2013)

b. Select the Details tab.
c. Click Copy to File....
d. Click Next.
e. Select Base-64 encoded x.5098 format.
f. Click Next.
g. Click Browse... and select a filename for the certificate (ending in the .cer file extension)
and a folder in which the certificate will be stored.
h. Click Next and then Finish.
Or, use the openssl x509 program.
3. Set the certificate using the setauthparam ladp-ssl-cacert <certicate> command,
where <certificate> is the name of the certificate you previously located or converted.
Example:
openssl x509 -inform DER -in ca.crt -outform PEM -out ca.cer
In the example above, the openssl x509 command is used to convert the CA certificate
from ca.crt format to ca.cer format, which can then be used with the setauthparam
command.
setauthparam -f ldap-ssl-cacert ca.cer
In the example above, the setauthparam command is issued to set the CA certificate to the
ca.cer file.
Configuring Account Location Parameters
To configure the account location parameters:
1. If you are unsure of the user’s account information, select a known user’s full name (to be
entered as the cn value) and run the ldapsearch command using the
defaultNamingContext value previously displayed in “Configuring Connection Parameters”
(page 28). Make a note of the group information displayed in the command’s output.
2. Issue the setauthparam accounts-dn <DN_path> command.
3. Issue the setauthparam account-obj user command.
4. Issue the setauthparam account-name-attr sAMAccount command.
5. Issue the setauthparam memberof-attr memberOf command.
NOTE: You must know the user’s password in order to successfully use the checkpassword
command.
6. Issue the checkpassword command to obtain information about the user’s group memberships
from the LDAP server.
Example:
% ldapsearch -LLL -x -H ldap://192.168.10.13 -D 'NTDOM1\joeadmin' -W -b
DC=3par,DC=com -s sub '(cn=3PARuser)' dn
Enter LDAP Password:
dn: CN=3PAR User,OU=Engineering,OU=Users,DC=3par,DC=com
30 Managing User Accounts and Connections