HP 3PAR-to-3PAR Storage Peer Motion Guide (OS 3.1.2 MU2) (QL226-97008, June 2013)

2. Select Pick a pair for <destination port>, then select the port you want paired with the
destination port. (Peer ports display as bold.)
NOTE: If the host ports are not already configured, you can configure them in the Port
Parameters area.
NOTE: At any time, you can view host and peer port WWNs by clicking “Show Port
WWNs” (page 14) on the Set Up Connections screen.
3. Select Apply. (This is enabled when the port parameters are modified.)
If the paired port is online, a confirmation dialog box appears, indicating the port must be
set to offline. Click Yes to continue.
The Port Configuration and Zoning dialog box appears.
Show Port WWNs
This dialog box displays the source system's system host port WWNs and the destination systems'
peer port WWNs. Use this information to zone the peer ports to the host ports.
14 Using the Peer Motion Manager