HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

For Details SeeAuthorityDescriptionCommand
“showrsv” (page 469)Any role in the system.Displays information about
reservation and registration
showrsv
of VLUNs connected on a
Fibre Channel port.
“showvv” (page 506)Any role in the system.Displays virtual volumes in
the system.
showvv
“showvvcpg” (page 519)Any role in the system.Displays the virtual volume
sets defined on the HP 3PAR
showvvcpg
Storage System and their
associated members.
“showvvset” (page 527)Any role in the system.Displays the virtual volume
sets defined on the HP 3PAR
showvvset
Storage System and their
members.
“startvv” (page 586)Super, Service
1
Starts virtual volumes.startvv
Any role granted the
vv_start right.
“updatesnapspace”
(page 658)
Super, Edit
Any role granted the
snapspace_update right.
Starts a task to update the
actual snapshot space used
by a virtual volume.
updatesnapspace
1
You need access to all domains in order to run this command.
Virtual LUN (Export) Management
For Details SeeAuthorityDescriptionCommand
“createvlun” (page 151)Super, Edit
Any role granted the
vlun_create right.
Creates a virtual volume as
a SCSI LUN.
createvlun
“removevlun” (page 256)Super, Edit
Any role granted the
vlun_remove right.
Removes VLUNs.removevlun
“showvlun” (page 503)Any role in the system.Displays VLUNs in the
system.
showvlun
Web Services API (WSAPI) Commands
For Details SeeAuthorityDescriptionCommand
“setwsapi” (page 349)Super, Service
Any role granted the
wsapi_set right.
Sets properties of the Web
Services API server.
setwsapi
“showwsapi” (page 529)Any role in the system.Displays the WSAPI server
service configuration state.
showwsapi
“startwsapi” (page 587)Super, Service
Any role granted the
wsapi_start right.
Starts the WSAPI server.startwsapi
“stopwsapi” (page 638)Super, Service
Any role granted the
wsapi_stop right.
Stops the WSAPI server.stopwsapi
Web Services API (WSAPI) Commands 41