3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

vi
Table of Contents
Messages and Operator’s Guide InForm OS Version 2.3.1
3.3.1 Cabinet Numbering 3.5
3.3.2 PDU Numbering 3.7
3.3.3 Battery Backup Unit Numbering 3.9
3.3.4 Controller Node Numbering 3.11
3.3.5 Drive Chassis Numbering 3.15
3.3.6 Power Supply Numbering 3.20
4 Numbering System and Component Locations for E-Class Servers
4.1 Identifying Storage Server Components 4.2
4.2 Service Processor Placement 4.4
4.3 Understanding Component Numbering 4.4
4.3.1 Cabinet Numbering 4.4
4.3.2 PDU Numbering 4.7
4.3.3 Controller Node Numbering 4.9
4.3.4 Drive Chassis Numbering 4.12
4.3.5 Power Supply Numbering 4.16
5 Numbering System and Component Locations for F-Class Servers
5.1 Identifying Storage Server Components 5.2
5.2 Service Processor Placement 5.4
5.3 Understanding Component Numbering 5.4
5.3.1 Cabinet Numbering 5.4
5.3.2 PDU Numbering 5.7
5.3.3 Controller Node Numbering 5.9
5.3.4 Drive Chassis Numbering 5.11
5.3.5 Power Supply Numbering 5.15
6 Understanding S-Class LED Status
6.1 Using the Component LEDs 6.2
6.1.1 Removing the Bezels and Unlocking the Door 6.2
6.1.2 Drive Cage LEDs 6.4
6.1.3 Controller Node LEDs 6.16
6.1.4 3PAR Fibre Channel Port LEDs 6.23