3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

12.22
Messages and Operator’s Guide InForm OS Version 2.3.1
If this is not because of a service action, please contact your local service provider for further
information.
STATE 5
Not Ready
SUGGESTED ACTION
The PD specified in the alert has reported it being not ready. Use the CLI command showpd
<pd_id>
to confirm the disk is still in this state.
This state might be temporary and might fix itself on retries. If the error persists, contact your
local service provider for technical support and services.
STATE 6
Missing
SUGGESTED ACTION
The PD specified in the alert has been missing on both ports. Use the CLI command showpd
<pd_id>
to confirm the disk is still in this state.
This state might be temporary and might fix itself on retries. If the error persists, contact your
local service provider for technical support and services.
STATE 7
Missing A Port
SUGGESTED ACTION
The PD specified in the alert has its A port missing. Use the CLI showpd <pd_id> to confirm it
is still in this state.
If the disk has disappeared from the A loop, it reports its A loop as missing. This could also
occur because of a servicemag operation or a controlmag offloop operation.
Contact your local service provider for technical support and services.
STATE 8
Missing B Port
SUGGESTED ACTION
The PD specified in the alert has its B port missing. Use the CLI showpd <pd_id> to confirm it
is still in this state.