3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

11.30
Troubleshooting InServ Storage Server Components
Messages and Operator’s Guide InForm OS Version 2.3.1
11.4.9.6 Port Suggested Action 2
FC node-ports that normally contain SFPs will report an error if the SFP has been removed. The
condition can be checked using the
showport -sfp command. In this example, the SFP in
0:3:1 has been removed from the adapter:
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
0:0:1 OK FINISAR_CORP. 2.1 No No No Yes
0:0:2 OK FINISAR_CORP. 2.1 No No No Yes
0:3:1 - - - - - - -
0:3:2 OK FINISAR_CORP. 2.1 No No No Yes
11.4.9.7 Port Example 3
Component -Description- Qty
Port Disabled SFPs 1
Component -Identifier- --Description--
Port port:3:5:1 SFP is disabled
11.4.9.8 Port Suggested Action 3
A node-port SFP will be disabled if the port has been placed offline using the controlport
offline
command. Also see Example 4.
cli% showport -sfp
N:S:P -State- -Manufacturer- MaxSpeed(Gbps) TXDisable TXFault RXLoss DDM
3:5:1 OK FINISAR_CORP. 4.1 Yes No No Yes
3:5:2 OK FINISAR_CORP. 4.1 No No No Yes
11.4.9.9 Port Example 4
Component -Description- Qty
Port Offline ports 1
Component -Identifier- --Description--
Port port:3:5:1 is offline
11.4.9.10 Port Suggested Action 4
Check the state of the port with showport. If a port is offline, it was deliberately put in that
state using the
controlport offline command. Offline ports may be restored using
controlport rst.
cli% showport
N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type
3:5:1 target offline 2FF70002AC00054C 23510002AC00054C free