3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.18
Using the Component LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
6.1.3.1 QLogic Fibre Channel Port LEDs
The QLogic Fibre Channel adapters in the InServ S-Class Storage Server controller nodes also
contain Fibre Channel port LEDs (Figure 6-9).
Figure 6-9. QLogic Fibre Channel Port LEDs
Each QLogic port in the Fibre Channel adapter has an LED pair composed of one green LED
(left) and one amber LED (right). For dual port QLogic Fibre Channel adapters, the LED pair for
PORT 2 is below the LED pair for PORT 1.
Ethernet 10/
100 MB/sec
Light on 100 MB/sec mode.
No light 10 MB/sec mode (or disconnected).
Table 6-5. Controller Node LED Displays (continued)
LED Appearance Meaning
0516_L_R1
Port 1 LEDs
Port 1
Port 2
Port 2 LEDs
Green LEDs
Amber LEDs