3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.116
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
showpdvv
DESCRIPTION
The showpdvv command displays the virtual volumes hat are mapped to a particular physical
disk.
SYNTAX
showpdvv [options] [<PD_ID> [:<chunklet>]...]
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
-sum
Shows number of chunklets used by virtual volumes for different space types for each
physical disk.
–p <pattern>
PDs matching the specified pattern are displayed. The following arguments can be
specified as patterns for this option:
–nd <item>
Specifies one or more nodes. Nodes are identified by one or more integers (item).
Multiple nodes are separated with a single comma (
1,2,3). A range of nodes is
separated with a hyphen (
0–3). The primary path of the disks must be on the
specified node(s).
–st <item>
Specifies one or more PCI slots. Slots are identified by one or more integers (item).
Multiple slots are separated with a single comma (
1,2,3). A range of slots is
separated with a hyphen (
0–3). The primary path of the disks must be on the
specified PCI slot(s).
NOTE: An item is specified as an integer, a comma-separated list of integers, or a
range of integers specified from low to high.