3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

19.12
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
removehost
DESCRIPTION
The removehost command removes a system host or paths to a host. If one or more paths are
specified, the command removes only those paths, otherwise the entire host definition is
removed.
SYNTAX
removehost [options] <hostname> [<WWN>...|<ISCSI_name>...]
AUTHORITY
Super, Edit
OPTIONS
–rvl
Remove World Wide Name(s) (WWN(s)) or iSCSI names even if there are Virtual Volume
Logical Unit Numbers (VLUNs) exported to the host. This option cannot be used if the entire
host definition is being removed.
-iscsi
Specifies that the paths are iSCSI names. If this option is not specified, the paths are WWNs.
SPECIFIERS
<hostname>
Specifies the host name, using up to 31 characters.
<WWN>
Only the specified WWN(s) path to the specified host is removed. This specifier is not
required on the command line. If a WWN is not specified, the entire host definition is
removed.
NOTE: You need access to all domains in order to run this command.