3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

21.49
InForm OS Version 2.2.4 Command Line Interface Reference
COMMAND
setpd
DESCRIPTION
The setpd command marks a physical disk as allocatable or non allocatable for logical disks.
SYNTAX
setpd ldalloc on|off <PD_ID>...
AUTHORITY
Edit, Service
SUBCOMMANDS
ldalloc on|off
Specifies that the physical disk, as indicated with the PD_ID specifier, is either allocatable
(
on) or nonallocatable for logical disks (off).
OPTIONS
None.
SPECIFIERS
<PD_ID>...
Specifies the physical disk identification using an integer.
RESTRICTIONS
None.
EXAMPLES
The following example displays physical disk 0 marked as non allocatable for logical disks.
NOTE: You need access to all domains in order to run this command.
cli% setpd ldalloc off 0