3PAR InForm® OS 2.2.4 CLI Reference (320-200114 Rev A, March 2009)

10.9
InForm OS Version 2.2.4 Command Line Interface Reference
COMMAND
controlport
DESCRIPTION
The controlport command controls all aspects of a Fibre Channel or Remote Copy port,
including the port’s connection type and data rate.
SYNTAX
The syntax for the controlport command can be one of the following:
■ controlport rst [–m <mode>|–l|-i] [–f] <node:slot:port>...
■ controlport offline <node:slot:port>
■ controlport lip [–c <cagename>] [–f] <node:slot:port>...
■ controlport ct <ctval> [–f] <node:slot:port>...
■ controlport cl2 <cl2val> [–f] <node:slot:port>...
■ controlport rate <rateval> [–f] <node:slot:port>...
■ controlport vcn <vcnval> [–f] <node:slot:port>...
■ controlport persona <personaval> [–i][–f] <node:slot:port>...
■ controlport nssync [–f] <node:slot:port>
■ controlport intcoal <intcoalval> [–f] <node:slot:port>...
■ controlport rcip addr [–f] <IP_address> <netmask>
<node:slot:port>...
■ controlport rcip gw [–f] <gateway_address> <node:slot:port>...
■ controlport rcip delete [–f] <node:slot:port>...
■ controlport rcip mtu <MTU_size> <node:slot:port>...
■ controlport rcip state up|down [–f] <node:slot:port>...
■ controlport rcip speed <value> half|full <node:slot:port>...
■ controlport rcip speed auto <node:slot:port>...
■ controlport rcip ping [–c <count>|–w <wai>|–s <size>|–pf]
<IP_address> <node:slot:port>...