HP 3PAR System Reporter 3.1.0 Software User's Guide (QL226-96645, December 2012)

7. An alert window appears confirming that the alert rule has been changed.
8. Click OK to return to the Sampling Policies window.
Removing an Alert Rule
To remove an alert rule:
1. Point your browser at the Web server where Apache HTTP Server and the HP 3PAR System
Reporter Web server scripts are installed.
The 3PAR System Reporter main window appears.
2. Click Policy Settings in the Extras Menu area.
The 3PAR System Reporter Policies window appears.
3. Choose the Alert Rules tab.
4. Click Remove Alert.
5. Select the alert rule to remove from the drop-down list.
6. Click Submit Query.
7. An alert window appears confirming that the alert rule was removed.
8. Click OK to return to the Sampling Policies window.
Alert Rule Parameters
Alert rules are specified using parameters described in the following sections.
Data Table
The data table on which the rule operates. The currently supported data tables are described in
Table 55 (page 119).
Table 55 Data Table
DescriptionData Table
Port performance table.statport
Represents the port bandwidth utilized by the 8g port. Represents the port bandwidth utilized by
the 4g port. Represents the port bandwidth utilized by the 2g port. Represents the port bandwidth
utilized by the 1g port.
statport_8gstatport_4gstatport_2g
statport_1g
Represents the sum of all the ports on a node. This allows you to generate alerts when nearing the
limits of IOPs/s and bandwidth of a node.
statport_nodesum
Represents the sum of all the disk ports on a node. This allows you to generate an alert when
nearing the limits of back-end (disk) IOPs/s or bandwidth for the node.
statport_disknodesum
Represents the sum of all the ports on a node by host. This allows you to generate alerts when
nearing the limits of IOPs/s and bandwidth of a node by host.
statport_hostnodesum
Represents the sum of all the ports on an HP 3PAR StoreServ Storage. This allows you to generate
alerts when nearing the limits of IOPs/s and bandwidth of the system.
statport_syssum
Physical Disk performance table.statpd
Restricts statpd to only the NL 7.2K RPM PDs.statpd_nl7
Restricts statpd to only the FC 10K RPM PDs.statpd_fc10
Restricts statpd to only the FC 15K RPM PDs.statpd_fc15
Restricts statpd to only the SSD PDs with speed 150.statpd_ssd150
Represents the aggregation of all the PDs in the HP 3PAR StoreServ Storage.statpd_sum
Represents the aggregation of all the NL 7.2K RPM PDs in the HP 3PAR StoreServ Storage.statpd_nl7sum
Represents the aggregation of all the FC 10K RPM PDs in the HP 3PAR StoreServ Storage.statpd_fc10sum
Configuring Rules for Email Alerts 119