HP 3PAR F-Class, T-Class, StoreServ 10000 Storage Troubleshooting Guide (QL226-96953, May 2013)

Figure 13 Numbering for Dual-Port Fibre Channel Adapters in the Controller Node PCI Slots
Each Fibre Channel adapter in a PCI slot has four ports. Each iSCSI adapter in a PCI slot has two
or four ports. PCI adapters assume the numbers of the PCI slots they occupy.
• In dual-port adapters, ports are labeled port 1 and 2, from top to bottom.
• In quad-port Fibre Channel adapters, the ports are numbered port 1–4, from top to bottom.
Inside the controller node are control cache DIMMs and data cache DIMMs.
• Control cache DIMMs are located in control cache slots 0 and 1 (Figure 14 (page 18)).
• Data cache DIMMs are located on data cache riser cards (Figure 14 (page 18)).
Understanding Component Numbering 17