HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

stoprcopygroup
DESCRIPTION
The stoprcopygroup command stops the Remote Copy functionality for the specified Remote
Copy volume group.
SYNTAX
stoprcopygroup [option <arg>] <group_name>|<pattern>...
AUTHORITY
Super, Edit
Any role granted the rcopygroup_stop right.
OPTIONS
nosnap
In synchronous mode, this option turns off the creation of snapshots. This is useful if
removercopygroup is to be run to remove Remote Copy. In asynchronous periodic mode, this
option deletes any current synchronization snapshots.
-t <target_name>
Indicates that only the group on the specified target is stopped. If this option is not used, by default,
the stoprcopygroup command will affect all of a group’s targets.
-f
Specifies that the command is forced. If this option is not used, the command requires confirmation
before proceeding with its operation.
-pat
Specifies that specified patterns are treated as glob-style patterns and all Remote Copy groups
matching the specified pattern will be stopped. The -pat option can specify a list of patterns. By
default, confirmation is required to proceed with the command unless the -f option is specified.
This option must be used if the <pattern> specifier is used.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group to stop.
<pattern>
Specifies a glob-style pattern. This specifier can be repeated to stop multiple groups. If the
<pattern> specifier is not used, the <group_name> specifier must be used.
RESTRICTIONS
This command requires the HP 3PAR Remote Copy Software license. Contact your local service
provider for more information.
EXAMPLES
The following example stops Remote Copy for Group1:
# stoprcopygroup Group1
636 Stop Commands