HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

Table 37 Volumes Created Based on Parameters to CreateOrModifyElementFromStoragePool()
(continued)
TPD_CreateOrModifyElementFromStoragePoolsCreateOrModifyElementFromStoragePoolType of Volume Created
correspond to allocation limit and
warning respectively of the snap
space.
Not supported.Not supported.Legacy TPVV, where user and snap
space both draw from the same DSP.
Fully provisioned volume, where user
space draws from DSP.
1. ElementType = NULL or
StorageVolume (2).
1. ElementType = NULL or
StorageVolume (2).
2. 2.InPool = DSP nPools[0] = DSP, InPools[1] = NULL.
3.3. Goal can be NULL. If the Goal
parameter is present, all LD related
Goal = NULL or DSPName
property not set. If the Goal
parameters in Goal would be
ignored.
parameter is present, all LD related
parameters in Goal would be
ignored.
Fully-provisioned CPVV, where user
space and snap space draw from the
same DSP or two different DSPs.
1. ElementType = NULL or
StorageVolume (2).
1. ElementType = NULL or
StorageVolume (2).
2. InPools[0] = DSP1, InPools[1] =
DSP2.
2. InPool = DSP.
3. Goal.DSPName property set. If the
Goal parameter is present, all LD
3. Goal can be NULL. If it is present,
all LD related parameters in Goal
are ignored.
related parameters in Goal are
ignored.
Goal.SpaceLimit and
Goal.SpaceLimitWarningThreshold
Goal.SpaceLimit and
Goal.SpaceLimitWarningThreshold
corresponds to allocation limit and
warning respectively of the snap space.
corresponds to allocation limit and
warning respectively of the snap
space.
Thinly provisioned volume, where user
space draws from DSP.
1. ElementType =
ThinlyProvisionedStorageVolume
(5).
1. ElementType =
ThinlyProvisionedStorageVolume(5)
2. InPool = DSP.
2. InPool = DSP.
3. . Goal == NULL or DSPName
property not set. If it is present, all 3. Goal can be NULL. If it is present,
all LD related parameters in Goal
are ignored.
LD related parameters in Goal are
ignored.
Thinly provisioned CPVV, where user
space and snap space draw from the
same DSP or two different DSPs.
1. ElementType =
ThinlyProvisionedStorageVolume(5).
1. ElementType =
ThinlyProvisionedStorageVolume(5).
2. 2.InPool = DSP. InPools[0] = DSP1, InPools[1] =
DSP2.
3. Goal.DSPName property set. If the
Goal parameter is present, all LD
3. Goal can be NULL. If it is present,
all LD related parameters in Goal
would be ignored.
related parameters in Goal are
ignored.
Goal.SpaceLimit and
Goal.SpaceLimitWarningThreshold
Goal.SpaceLimit and
Goal.SpaceLimitWarningThreshold
corresponds to allocation limit and
warning respectively of the snap space.
corresponds to allocation limit and
warning respectively of the snap
space.
NOTE: Consult “Modifiable StorageSetting Properties for StorageVolume” (page 39) for the list
of modifiable properties of StorageSetting.
Modifiable StorageSetting Properties for StorageVolume
When creating or modifying a thin-provisioned or full-provisioned StorageVolume, a client can
change the following properties of a StorageSetting meant for the user space of the volume
to a non-default value. The provider ignores all other properties.
Block Services Package 39