HP 3PAR CIM API Programming Reference (OS 3.1.2 MU2) (QL226-97015, June 2013)

// CIM_FCPort REF Dependent; -- reenable this line if we support
TPD_SCSIInitTargetLUPath
};
// ==================================================================
// HP 3PAR SCSI Protocol Controller And StorageVolume association
// ==================================================================
[Association,
Description (
"HP 3PAR Storage System SCSI protocol controller and storage volume "
"association. ")]
class TPD_ControllerForUnit : CIM_ProtocolControllerForUnit
{
[Override ("Antecedent"),
Description ("The SCSI Protocol Controller.") ]
TPD_SCSIController REF Antecedent;
[Override ("Dependent"), Weak, Description (
"The storage volume controlled by the SCSI protocol controller.") ]
TPD_StorageVolume REF Dependent;
};
// ==================================================================
// HP 3PAR SCSIProtocolEndpoint (front-end FC port)
// ==================================================================
[Description
("HP 3PAR Storage System SCSIProtocolEndpoint (front-end FC port). "
"This class represent FC ports that are connecting to hosts or "
"fabric or disk. ")]
class TPD_SCSIProtocolFCEndpoint : CIM_SCSIProtocolEndpoint
{
[Description ("Connection mode, can be one of: "
" Disk - disk connection "
" Host - host connection "
" RCFC - RCFC connection "
" Peer - data migration connection."),
ValueMap {"0", "1", "2", "3"},
Values {"Disk", "Host", "RCFC", "Peer"} ]
uint16 ConnectionMode;
};
// ==================================================================
// HP 3PAR SCSIProtocolEndpoint on FC-AL card (connects to initiator
// endpoint on the node controller)
// ==================================================================
//[Description
// ("HP 3PAR Storage System SCSIProtocolEndpoint that resides on the "
// "FC-AL card. This endpoint is connected to the initiator FC "
// "endpoint the node controller.")]
//class TPD_SCSIProtocolFCALEndpoint : CIM_SCSIProtocolEndpoint
//{
//};
// ==================================================================
// HP 3PAR SCSIProtocolController And SCSIProtocolEndpoint association.
// NOTE: In SMI-S 1.1, this association replaces ControllerForPort
// association (SMI-S 1.02).
// ==================================================================
[Association,
Description (
"HP 3PAR Storage System SCSI protocol controller and the front end "
"target SCSIProtocolEndpoint association. ")]
class TPD_SAPAvailableForElement : CIM_SAPAvailableForElement
{
[Override ("AvailableSAP"), Description (
"The SCSIProtocolEndpoint (front end port).") ]
3PAR_TPD.mof 207