HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

If it is not specified then the report ends with the most recent sample.
-hires
Select high resolution samples (5 minute intervals) for the report. This is the default setting.
-hourly
Select hourly samples for the report.
-daily
Select daily samples for the report.
-groupby <groupby>[,<groupby>...]
For -attime reports, generate a separate row for <groupby> items. Each <groupby> must be
different and one of the following:
• DOM_NAME Domain name
• CPG_NAME Common Provisioning Group name
• LDID Logical disk ID
• LD_NAME Logical disk name
• DISK_TYPE The disk type of the physical disks used by the LD
• RAID_TYPE The RAID type of the LD
• SET_SIZE The RAID set size of the LD
• STEP_SIZE The RAID step size of the LD
• ROW_SIZE The RAID row size of the LD
• OWNER The owner node for the LD
-cpg <CPG_name|pattern>[,<CPG_name|pattern>...]
Limit the data to LDs in CPGs with names that match one or more of the specified names or glob-style
patterns.
-disk_type <type>[,<type>...]
Limit the data to disks of the types specified.
• FC – Fibre Channel
• NL – Nearline
• SSD – Solid State Drive
-raid_type <type>[,<type>...]
Limit the data to RAID of the specified types. Allowed types are 0, 1, 5 and 6.
SPECIFIERS
[<LD_name>...|<pattern>...]
LDs matching either the specified LD_name or glob-style pattern are included. This specifier can
be repeated to display information for multiple LDs. If not specified, all LDs are included.
RESTRICTIONS
None
552 System Reporter (SR) commands