HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

SPECIFIERS
<LD_name>...
Requests that information for a specified logical disk is displayed. This specifier can be repeated
to display configuration information about multiple logical disks. If not specified, configuration
information for all logical disks in the system is displayed.
<pattern>...
Specifies that the logical disk matching the specified glob-style pattern is displayed. This specifier
can be repeated to display configuration information about multiple logical disks. If not specified,
configuration information for all logical disks in the system is displayed. See “Glob-Style Pattern”
(page 12) for more information.
RESTRICTIONS
None.
EXAMPLES
The following example displays information for all LDs in a two node system:
cli% showld
Id Name RAID -Detailed_State- Own SizeMB UsedMB Use Lgct LgId
WThru MapV
0 log0.0 1 normal 0/- 20480 0 log 0 ---
Y N
1 log1.0 1 normal 1/- 20480 0 log 0 ---
Y N
2 pdsld0.0 1 normal 0/1 8192 0 P,F 0 ---
Y N
3 admin.usr.0 1 normal 0/1 5120 5120 V 0 ---
N Y
4 admin.usr.1 1 normal 1/0 5120 5120 V 0 ---
N Y
5 VV111.usr.0 0 normal 0/1 256 256 V 0 ---
N Y
6 VV111.usr.1 0 normal 1/0 256 256 V 0 ---
N Y
The following example displays information for all LDs in a four node system:
cli% showld
Id Name RAID State Own SizeMB UsedMB Use Lgct LgId WThru MapV
0 log0.0 1 normal 0/-/-/- 20480 0 log 0 --- Y N
1 log1.0 1 normal 1/-/-/- 20480 0 log 0 --- Y N
2 pdsld0.0 1 normal 0/1/2/3 4096 0 P,F 0 --- Y N
3 admin.usr.0 1 normal 0/1/3/2 3584 3584 V 0 --- N Y
4 admin.usr.1 1 normal 0/1/2/3 1536 1536 V 0 --- N Y
5 admin.usr.2 1 normal 1/0/3/2 5120 5120 V 0 --- N Y
6 100_tune.usr.0 1 normal 0/1/2/3 512 512 V 0 --- N Y
The columns in the previous example are identified as follows:
• Id. The ID of the logical disk.
• Name. The name of the logical disk.
• (Not shown) Domain. The domain to which the logical disks belongs. If the domain does not
exist, - is displayed.
showld 395