HP 3PAR Command Line Interface Reference (OS 3.1.2 MU2) (QL226-97016, June 2013)

slot
Specifies the PCI bus slot in the node where slot is a number from 0 through 5.
port
Specifies the FCS port number of the card in PCI bus slot using 1 through 4.
<host_name | host_set>
Specifier requests that exports to the specified host or host set, named using up to 31 characters
in length, be removed. The host set name must start with set:. If this specifier is not used, the
N:S:P specifier must be used.
RESTRICTIONS
• To remove a specific VLUN, you must supply the same specifiers and options that you used
when that VLUN was created. Use the showvlun–t command to view all created VLUN
specifiers and options.
• Issuing the removevlun command with the –pat option specified returns a request for
confirmation to remove VLUNs, unless the –f option is specified.
EXAMPLES
The following example deletes VLUNs for volume vv0, LUN 0, host host1:
cli% removevlun –f vv0 0 host1
NOTES
• If the VLUN to be removed is a matched set, use the port and host_name specifiers.
• Verify the removal of VLUNs by issuing the showvlun command. See “showvlun” (page 503)
for more information.
removevlun 257