HP B-series Fabric OS 7.0.2d Release Notes (5697-2822, August 2013--includes all 7.0.x versions)

Table 1 Supported Fabric OS versions (continued)
Recommended versionEarliest compatible versionModel
7.1.16.3.2dHP StorageWorks SAN Director 6 Port 10 Gb ISL
Blade (FC10-6)
7.1.1
2
6.3.2dHP StorageWorks 8/8 SAN Switch
HP StorageWorks 8/24 SAN Switch
HP StorageWorks 8/40 SAN Switch
HP StorageWorks 8/80 SAN Switch
7.1.16.3.2dHP StorageWorks Encryption SAN Switch
7.1.1
6.3.2dHP StorageWorks 1606 Extension SAN Switch
(Brocade 7800)
7.1.16.3.2dHP StorageWorks 2408 FCoE Converged Network
Switch (Brocade 8000)
7.1.16.3.2dHP StorageWorks DC SAN Director Switch 10/24
FCoE Blade (Brocade FCOE10-24)
7.1.16.3.2dHP StorageWorks DC SAN Director Multiprotocol
Extension Blade (Brocade FX8-24)
HP StoreFabric Enhanced Multiprotocol Extension
Blade (FX8-24E)
7
7.1.1
7.0.0cHP SN8000B 8-Slot SAN Backbone Director Switch
6
7.1.1
7.0.0cHP SN8000B 4-Slot SAN Director Switch
6
7.1.17.0.0cHP SN8000B 16 Gb 32-port FC Blade
7.1.17.0.0cHP SN8000B 16 Gb 48-port FC Blade
7.1.1
7.0.1HP SN8000B 8 Gb 32-port Enhanced Fibre Channel
Blade
5
7.1.1
7.0.1HP SN8000B 8 Gb 48-port Enhanced Fibre Channel
Blade
5
7.1.1
7.0.0cHP SN6000B 16 Gb FC Switch
6
7.1.17.0.1HP SN3000B 16 Gb FC Switch
5
7.1.17.1.0aHP SN3000B 16 Gb FC Switch
5
7.1.16.3.2dHP StorageWorks DC Switch Encryption FC Blade
10.4.5a
6
10.4.5Data Center Fabric Manager
NOTE: DCFM does not support any 16 Gbps
products
12.0.211.1.0HP Network Advisor
Table notes:
1
All zoning and fabric operations in a fabric with products running older versions of Fabric OS
should be performed using interfaces to products running the latest version of Fabric OS. This is
important for Brocade 3xxx series switches that do not support zoning configuration for newer
products.
2
When directly attached to a host or target that is part of an encryption flow.
3
Products operating with Fabric OS versions earlier than 5.3.1b or 6.1.0e cannot participate in
a logical fabric that is using XISLs (in the base fabric).
4
These platforms cannot be directly attached to hosts or targets for encryption flows.
14