EZSwitchSetup Administrator's Guide v6.3.0 (53-1001344-01, July 2009)

EZSwitchSetup Administrator’s Guide 13

53-1001344-01

Installing and running the EZSwitchSetup wizard

Confirming IP addresses

The Confirm IP Address screen (Figure 10) is displayed after you have assigned IP addresses, using

either a serial connection or an Ethernet connection.

1. Check the displayed addresses carefully to be sure they are correct.

FIGURE 10 EZSwitchSetup Confirm IP Address

2. Click Next to confirm the addresses.

The Continue Configuration? screen is displayed (Figure 11).

3. Select one of the following continuation options:

• Continue setting up your target switch with EZManager

Select this option if you intend to use EZSwitchSetup Manager as your primary

management program for this switch.

• Discover another switch on the same subnet for IP assignment only

Select this option to discover another switch and set the IP address.

If you select this option, EZSwitchSetup Manager will not be the default management tool

for this current target switch. To set up EZSwitchSetup Manager as the management tool

for this switch, you must discover it again with EZSwitchSetup and select the first

continuation option.