Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

764 Fabric OS Message Reference
53-1002448-01
ZONE-1044
115
ZONE-1044
Message <timestamp>, [ZONE-1044], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is set to All Access.
Probable Cause Indicates that the Default Zone access mode is set to All Access.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
ZONE-1045
Message <timestamp>, [ZONE-1045], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is already set to No Access.
Probable Cause Indicates that the Default Zone access mode is already set to No Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1046
Message <timestamp>, [ZONE-1046], <sequence-number>,, INFO, <system-name>, The Default
Zone access mode is already set to All Access.
Probable Cause Indicates that the Default Zone access mode is already set to All Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1047
Message <timestamp>, [ZONE-1047], <sequence-number>,, INFO, <system-name>, Switch domain
(<domainr>) does not support defined database.
Probable Cause Indicates that a remote Brocade switch is running a lower version of Fabric OS that does not
support the defined database.
Recommended
Action
Upgrade all the switches to the same firmware version.
Severity INFO