Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

722 Fabric OS Message Reference
53-1002448-01
TRCE-1003
106
TRCE-1003
Message <timestamp>, [TRCE-1003], <sequence-number>,, ERROR, <system-name>, Trace dump
<optional slot indicating on which slot the dump occurs> was not transferred due
to FTP error.
Probable Cause Indicates that a trace dump has been created on the switch or the indicated slot but is not
automatically transferred from the switch due to an FTP error, such as a wrong FTP address, FTP
site down, or network down.
Recommended
Action
If the message persists, run the supportFtp command to set up automatic FTP transfers; then run
the supportSave command and contact your switch service provider.
Severity ERROR
TRCE-1004
Message <timestamp>, [TRCE-1004], <sequence-number>,, WARNING, <system-name>, Trace dump
<optional slot indicating on which slot the dump occurs> was not transferred
because trace auto-FTP disabled.
Probable Cause Indicates that trace dump files have been created on the switch or the indicated slot but are not
automatically transferred from the switch because auto-FTP is disabled.
Recommended
Action
Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity WARNING
TRCE-1005
Message <timestamp>, [TRCE-1005], <sequence-number>,, ERROR, <system-name>, FTP
Connectivity Test failed due to error.
Probable Cause Indicates that the connectivity test to the FTP host fails, because of an FTP error such as a wrong
FTP address, an FTP site down, or the network being down.
Recommended
Action
Run the supportFtp command to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity ERROR
TRCE-1006
Message <timestamp>, [TRCE-1006], <sequence-number>,, INFO, <system-name>, FTP
Connectivity Test succeeded to FTP site ' <FTP target configured by users> '.
Probable Cause Indicates that a connectivity test to the FTP host has succeeded. This feature is enabled by the
supportFtp -t command.