Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 415
53-1002448-01
FW-1533
45
FW-1533
Message <timestamp>, [FW-1533], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization crossed lower threshold boundary to in between low and high
thresholds.
Recommended
Action
No action is required.
Severity INFO
FW-1534
Message <timestamp>, [FW-1534], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization has dropped below upper threshold boundary to in between low
and high thresholds.
Recommended
Action
No action is required.
Severity INFO
FW-1535
Message <timestamp>, [FW-1535], <sequence-number>,, INFO, <system-name>, Fabric Watch has
stopped portfencing feature for <Area String> loss area in <Port Name> class since
FOS6.3. Disabling port fencing feature for this.
Probable Cause Indicates that in previous versions portfencing is configured for Link/Sync loss, but after upgrading
to new version, in which portfencing is not suppoted, resets the above bit.
Recommended
Action
No action is required. You are informed that PF bit is reset.
Severity INFO
FW-3010
Message <timestamp>, [FW-3010], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> value has changed(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization has changed.