Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 261

53-1002448-01

FCR-1029

Message <timestamp>, [FCR-1029], <sequence-number>,, INFO, <system-name>, In slot <slot

number> port WWN pool 95 percent allocated.

Probable Cause Indicates that the Port world wide name (WWN) pool has rolled over in the specified slot, and WWN

entries detected not in use are reused as needed.

Recommended

Action

It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed

in a very large MetaSAN environment with large number of logical storage area network (LSAN)

devices and fabrics, or there are highly dynamic changes to EX_Port connectivity. WWN conflicts

might cause unpredictable behavior in management applications.

To avoid WWN conflicts, all EX_Ports attached to fabrics with highly dynamic changes to EX_Port

connectivity should be disabled and then re-enabled.

Severity INFO

FCR-1030

Message <timestamp>, [FCR-1030], <sequence-number>,, INFO, <system-name>, Physical device

<device WWN> came online at fabric <fabric ID>.

Probable Cause Indicates that the physical device world wide name (WWN) came online in the specified fabric.

Recommended

Action

No action is required.

Severity INFO

FCR-1031

Message <timestamp>, [FCR-1031], <sequence-number>,, INFO, <system-name>, Physical device

<device WWN> went offline in fabric <fabric ID>.

Probable Cause Indicates that the physical device world wide name (WWN) went offline in the specified fabric.

Recommended

Action

No action is required.

Severity INFO

FCR-1032

Message <timestamp>, [FCR-1032], <sequence-number>,, INFO, <system-name>, Edge fabric

enabled security on port <port number> in fabric <fabric ID>.

Probable Cause Indicates that Secure mode was turned on in the edge fabric.