Brocade Fabric OS Message Reference - Supporting Fabric OS v7.0.1 (53-1002448-01, March 2012)

Fabric OS Message Reference 193
53-1002448-01
EM-1051
25
EM-1051
Message <timestamp>, [EM-1051], <sequence-number>,, INFO, <system-name>, <FRU Id>:
Inconsistency detected, FRU reinitialized.
Probable Cause Indicates that an inconsistent state was found in the field-replaceable unit (FRU). This occurs if the
state of the FRU was changing during a failover. The FRU is reinitialized and the traffic may have
been disrupted.
Recommended
Action
No action is required.
Severity INFO
EM-1057
Message <timestamp>, [EM-1057], <sequence-number>,, WARNING, <system-name>, Blade:<Slot
Id> is getting reset:<Fault reason>.
Probable Cause Indicates the blade is being automatically reset because of known resetable transient errors such
as an application-specific integrated circuit (ASIC) parity error.
Recommended
Action
No action is required if the switch does not reach the reset threshold for the switch or blade. If the
reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be
replaced.
Severity WARNING
EM-1058
Message <timestamp>, [EM-1058], <sequence-number>,, WARNING, <system-name>, Switch gets
reset:<Fault reason>.
Probable Cause Indicates that the switch is being automatically reset because of a known resetable transient
problem such as an application-specific integrated circuit (ASIC) parity error.
Recommended
Action
No action is required if the switch does not reach the reset threshold for the switch or blade. If the
reset threshold is reached on the switch or blade, the switch or blade will be faulted and should be
replaced.
Severity WARNING